Using the Web Interface
P/N 7010-0935
3-19
The main page is displayed.
Figure 3-14. Web Interface – Main Page
3. Log in through the Web interface by entering the login name and
password in the appropriate fields.
The default login and password are topcon. Login names and
passwords are case-sensitive and can be up to 12 alphanumeric
characters.
Figure 3-15. Web Interface – Login
4. Click Enter.
After logging in to the Web interface, you can view and modify
the receiver parameters.
When accessing the Web interface via SSL
communications, a warning may appear stating the
security certificate was issued by a company you
have not chosen to trust. You can safely ignore this
warning and continue with the login procedure.
Your communications will use SSL.
You can access the receiver without entering the
login name and password; however, you will be
restricted to view-only activities.
Net-G3A_OM_Book.book Page 19 Thursday, May 14, 2009 8:49 AM
To Next Page
Loading...
Need help?
General
