Topcon Paver System 5 User Manual

Paving Intersections with Cross Slope
P/N 7010-0341 www.topconpositioning.com
7-13
NOTICE
NOTICE
You may find after surveying the slope that the
number displayed is not the same as the desired
cross slope. This will occur if the surface being
paved is not also at the desired slope. To get
back to the correct slope continue paving in
automatic and slowly dial the display to the
desired slope. Failing to survey when changing
back to slope control could result in a bump in
the mat.

Topcon Paver System 5 Specifications

General

Brand	Topcon
Model	Paver System 5
Category	Control Systems
Language	English