System Overview
Topcon Paver System Five Operator’s Manual
1-8
Care and Preventive Maintenance
In general, follow these guidelines when using System Five:
• Always clean and thoroughly dry the removable components
before storing them in carrying cases. Use a clean, soft cloth
moistened with a neutral detergent or water.
• Keep carrying cases clean and dry. Do not leave them open and
exposed to the elements.
• Some moisture on the Control Box and its components is
acceptable during working conditions. Do not spray water or
use high pressure steam cleaner hoses directly on cables and
components.
• Use protective connector caps on cables when not using the
System Five for a period of time. Water accumulating on the
connectors can cause electrical shorts.
At the end of the day, performing general maintenance and storing
mobile parts will help to keep the System Five in top condition.
• Remove the Control Box and the Laser Tracker and dust with a
dry or damp non-abrasive, soft cloth.
• Insert cables into appropriate storage connectors after removing
the Control Box.
A Carrying Case is provided with each System Five. The Carrying
Case is lined and includes pre-cut sections for each Sonic Tracker II
and the Control Boxes. A cut-out section is also provided for
storing coil cords (Figure 1-8 on page 1-9).
To Next Page
Loading...
Need help?
General
