Topcon Paver System 5 User Manual

Operation & Menu Settings
Topcon Paver System Five Operator’s Manual
4-12
Survey/Indicate Button
Use the survey/indicate (Figure 4-16) button to lock on-grade
or continuously monitor the grade or slope setting on the LCD.
Figure 4-16. Survey/Indicate Button
Using the Survey Function
Survey sets the sensor to on-grade.
Hold the Survey/Indicate button for one second until the
Control Box beeps and the on-grade light illuminates.
Using the Indicate Function
The grade or slope setting continuously displays on the
LCD during indicate mode.
NOTICE
NOTICE
Indicate puts the System Five in Manual Mode.
Press and hold the Survey/Indicate button for three
seconds, until the Control Box emits a second beep.
“IND” briefly displays on the LCD, then the grade or slope
setting. The Grade Adjustment LEDs remain dark.
To exit Indicate Mode, push either the Survey/Indicate
button or the Auto button.
FiveSystem
AU TO
S UR VEY
SET
(ME
NU )
SURVEY

Topcon Paver System 5 Specifications

General

Brand	Topcon
Model	Paver System 5
Category	Control Systems
Language	English