Appendix A
P/N 7010-0341 www.topconpositioning.com
A-1
Safety Precautions
It is your responsibility to be completely familiar with the cautions
described in this manual. These messages advise against the use of
specific methods or procedures which can result in personal injury,
damage to the equipment, or unsafe operating conditions.
Remember, most accidents are caused by failure to observe basic
safety precautions.
1. Read and become familiar with the machine manufacturer’s
operation manual, including safety information before
installing, using, or servicing the Topcon System Five.
WARNING
WARNING
Improper operation, lubrication, maintenance,
or repair of this product can be dangerous
and could result in injury or death.
2. Use extreme caution on the jobsite. Working around heavy
equipment can be dangerous.
3. System Five is externally mounted on the machine. Do not
attach Topcon components while the machine is running.
4. Do Not allow any System Five component to limit the visibility
of the operator or protrude into traffic.
5. Use Ty-Wraps supplied with the System Five to keep hoses and
wires secured and away from possible wear or pinch points.
6. Always wear eye protection when welding, cutting, or grinding
on the machine.
To Next Page
Loading...
Need help?
General
