P/N 7010-0341 www.topconpositioning.com
A-3
NOTICE
NOTICE
All mounting bracket welds must be secure and
strong to prevent sensor equipment from
excessive vibration or from detaching at the weld
point during operation.
NOTICE
NOTICE
When operating in rainy weather or in wet
conditions, the Control Box and cables must be
thoroughly dried BEFORE placing them in the
Carrying Case at the end of the day.
NOTICE
NOTICE
Keep the Carrying Case dry at all times. DO NOT
allow moisture to get inside the case. Moisture
trapped in the case can adversely affect
components.
Topcon cannot anticipate all possible circumstances that could
result in a hazard. The warnings contained herein, therefore, are not
all inclusive. If you use a tool, procedure, work or operating method
other than those Topcon recommends, ensure the safety of yourself
and those around you before continuing.
To Next Page
Loading...
Need help?
General
