Toptech MultiLoad II - Page 119

Chapter 7 – Register Operations
11
9
{"CTL" } // 00023
{"CPL" } // 00024
{"Fallback Ceil"} // 00025
{"Avg Temperature"} // 00026
{"Avg Pressure" } // 00027
{"Avg Density" } // 00028
{"Avg Relative" } // 00029
{"Avg API Gravity"} // 00030
{"Unauth Gross" } // 00031
{"Unauth Net" } // 00032
{"Unauth Mass" } // 00033
{"Vapor Pressure" } // 00034
{"Recipe Pct" } // 00035
{"Recipe Volume" } // 00036
{"Blnd Target Vol"} // 00037
{"Blnd Target Pct"} // 00038
{"Btch Recipe Pct"} // 00039
{"Blnd Tg Vol Err"} // 00040
{"Blnd Tg Pct Err"} // 00041
{"Btch Rp Vol Err"} // 00042
{"Btch Rp Pct Err"} // 00043
{"Blnd Adj FlRate"} // 00044
};
ppppp – Zero-based preset number (00000-00011).
lllll = Zero based component number (00000-00007).
Modbus: Read/Write Register=298, Len=1, 16-Bit Integer (rrrrr)
Modbus: Read/Write Register=299, Len=1, 16-Bit Integer (ppppp)
Modbus: Read/Write Register=300, Len=1, 16-Bit Integer (lllll)
If type -= METER_RT, rrrrrppppplllll
Where:
rrrrr – Meter Real Time Parameter Type as
custom_logic_meter_real_time_prompt[] =
{
{"Clearing Errors"}, // 00000
{"Clear Totals"}, // 00001
{"Alarm Out"}, // 00002
{"Authorized"}, // 00003
{"Permissive"}, // 00004
{"Permissive Out"}, // 00005
{"SidStrm On Mtr"}, // 00006
{"Meter State" }, // 00014
{"Gross Delivered"}, // 00015
{"Gross Flow Rate"}, // 00016
{"Temperature" }, // 00017