Toptech MultiLoad II - Page 120

Chapter 7 – Register Operations
12
0
{"Pressure" }, // 00018
{"Density" }, // 00019
{"Relative Dens" }, // 00020
{"API Gravity" }, // 00021
{"Gross Creep Del"}, // 00022
{"Volume Preset"}, // 00023
};
ppppp – Zero-based preset number (00000-00011).
lllll = Zero based meter number (00000-00003).
Modbus: Read/Write Register=298, Len=1, 16-Bit Integer (rrrrr)
Modbus: Read/Write Register=299, Len=1, 16-Bit Integer (ppppp)
Modbus: Read/Write Register=300, Len=1, 16-Bit Integer (lllll)
If type -= ADDITIVE_RT, rrrrrppppplllll
Where:
rrrrr – Additive Real Time Parameter Type as
custom_logic_additive_real_time_prompt[]
{
(“Clearing Errors”), // 00000
(“Clear Batch"}, // 00001
(“Test Button"}, // 00002
("Pump Run"}, // 00003
{"Pump Kill"}, // 00004
{"Pump Status"}, // 00005
{"Open Blk Valve"}, // 00006
{"Blk Val Status"}, // 00007
{"Flush Pump Run"}, // 00008
{"Close Blk Valve"}, // 00009
{"Alarm Out"}, // 00010
{"Authorized"}, // 00011
{"Permissive"}, // 00012
{"Permissive Out"}, // 00013
{"Gross Delivered"}, // 00014
{"Additive Pct" } // 00015
{"Gross Curr Targ"}, // 00016
{"Gross Recipe" } // 00017
{"Flush Remain" } // 00018
{"Additive State" } // 00019
{"Missed Inj" } // 00020
{"Creep Gross" } // 00021
{"Unauth Gross" } // 00022
};
ppppp – Zero-based preset number (00000-00011).
lllll = Zero based additive number (00000-00015).