Toptech MultiLoad II - Page 65

Chapter 6 – Meter Commands
65
yyyy= sampler alarms in hexadecimal as:
union
{
unsigned int value;
struct
{
unsigned char sampler_fcm_com:1; // one or more FCMs that are required for
Sampler status or signals are in com
error.
unsigned char sampler_permissive:1; // Sampler permissive Alarm
unsigned char unused02:1;
unsigned char unused03:1;
unsigned char unused04:1;
unsigned char unused05:1;
unsigned char unused06:1;
unsigned char unused07:1;
unsigned char unused08:1;
unsigned char unused09:1;
unsigned char unused10:1;
unsigned char unused11:1;
unsigned char unused12:1;
unsigned char unused13:1;
unsigned char unused14:1;
unsigned char unused15:1;
} flags;
} sampler_alarms;
Query 1 Responses:
xxxx= sampler status #0 in hexadecimal as:
union
{
unsigned int value;
struct
{
unsigned char program_clear_errors:1; // command to clear errors
unsigned char remote_clear_errors:1; // command to clear errors
unsigned char driver_clear_errors:1; // command to clear errors
unsigned char clearing_errors:1; // currently clearing errors
unsigned char wm_clear_errors:1; // command to clear errors
unsigned char clear_batch:1;
unsigned char unused0_06:1;
unsigned char unused0_07:1;
unsigned char unused0_08:1;
unsigned char unused0_09:1;
unsigned char unused0_10:1;