Toptech MultiLoad II - Page 87

Chapter 7 – Register Operations
87
“pressure type” Select pressure type parameter
enum{ // Enumerated Value Register Value
PSIG = 1, // PSIG
KPA = 2, // KPA
BAR = 3 // BAR
};
“additive type” Select additive type parameter
enum{ // Enumerated Value Register Value
SOLENOID_WITH_METER = 1,
PISTON_WITH_NORM_FEEDBACK = 2,
PISTON_WITH_INV_FEEDBACK = 3,
PISTON_WITH_NO_FEEDBACK = 4,
ANALOG_VALVE_WITH_METER = 5
};
“deadman type” Select deadman type parameter
Enum{// Enumerated Value Register Value
CONTHLD =1 // Continuous push
HLD&REL =2 // Continuous push with schedule
PUSF =3 // Scheduled periodic push
};
“blend on lead type” Select blend on lead type parameter
Enum{// Enumerated Value Register Value
FIRCOMP =1 // Lead on first component
HIGPERC =2 // Highest Percentage is lead component
LOWPERC =3 // Lowest Percentage is lead component
};
“api bio product type” Select Api bio product type parameter
Enum{// Enumerated Value Register Value
NO_PRODUCT =0
E5 =1
E10 =2
E80 =3
E85 =4
E100 =5
BENZIN_PETROL =6
DIESEL =7
B5_RME =8
B7_RME =9
B100_RME =10
B5_SME =11
B7_SME =12
B100_SME =13