Greensmaster 3250--D Page 3 -- 1 7 Diesel Engine
8. Connect all electrical harness connectors to engine
using labels placed during engine removal.
9. Connectthrottlecable totheswiveloninjectorpump
speed control lever (Fig. 14). Adjust cable (see Adjust
ThrottleControlin the Adjustments section ofthischap-
ter).
10.Installexhaustsystemtomachine(seeExhaustSys-
tem in this section).
11.Install radiator to machine (see Radiator in this sec-
tion).
12.Install air cleaner to machine (see AirCleaner in this
section). Make sure that all hose clamps are properly
tightened.
13.Remove plugs placed during engine removal from
fuel hoses. Connect fuel supply hose to the injector
pumpfittingandfuelreturnhosetothe#3injectorfitting.
Secure fuel hoses with hose clamps.
14.Open fuel shut--off v alve on fuel tank. Check tank
and hoses for leaks.
15.Fill cooling system with coolant. Check radiator and
hoses for leaks.
16.Make sure that engine oil level is correct.
17.Make surethatalternatorbelt tension is properlyad-
justed.
18.Bleed fuel system.
Engine
Diesel
To Next Page
Loading...
Need help?
General
