Toro Groundsmaster 4300-D - Page 378

InstallingtheRearRoller(continued)
therollershouldbe0.5to1.0mm(0.020to0.040inch).T orquethebolts
to41N∙m(30ft-lb).
6.Installandtightenthefastenersthatsecureeachendoftherollertotheroller
mounts.T orquetherollershaftscrews(item4inFigure234)andbolts(item
8inFigure234)to40to47N∙m(29to35ft-lb).
7.Afteryoucompletetheassembly,raiseandlowerthecuttingdecktocheck
thatthehydraulichosesandttingsdonotcontactanything.
CuttingDeck:ServiceandRepairs
Page7–16
Groundsmaster
®
4300-D
16226SLRevC