Toro Reelmaster 5100-D - Page 131

11. Use an 8-32 machine screw to remove motor shaft
bearing retaining pin from housing (Fig. 50).
Figure 50
12. Remove motor shaft from housing (Fig. 51).
Figure 51
13. Press motor shaft out of bearings and spacer
(Fig. 52).
Figure 52
14. Remove spiral retaining ring and remove PTO seal
guide (with o-ring) from the housing (Fig. 53).
Figure 53
Reelmaster
®
5100-D Page 4 - 47 Transmission Repairs