Toro Reelmaster 5100-D - Page 281

44. Install the lock nuts onto the bolts. Tighten each nut
gradually until resistance is felt (Fig. 108). Tighten to a
torque of 20 - 24 ft-lb (27 - 33 Nm) in the sequence
shown (Fig. 109).
Figure 108
Figure 109
45. Tighten the plug to a torque of 8- 12 ft-lb (11 - 16 Nm)
(Fig. 110).
Figure 110
Reelmaster
®
223-D/5100-D/5300-D Page 7 - 51 Repairs