Toshiba e-studio 3511 - The Control Panel; Setting the Communication Report Output

119
6
Setting the Communication Report Output
The following conditions of the communication report output can be set.
If the [ALWAYS] button is selected: The report is output after every communication is completed.
If the [ON ERROR] button is selected: The report is output when a communication error has occurred.
- MEMORY TX: OFF, ALWAYS, ON ERROR
- DIRECT TX: OFF, ALWAYS, ON ERROR
- MULTI TX: OFF, ALWAYS, ON ERROR
- POLLING: OFF, ALWAYS, ON ERROR
- RELAY ORIGINATOR: OFF, ALWAYS, ON ERROR
- RELAY STATION: OFF, ALWAYS, ON ERROR
- RELAY DESTINATION: OFF, ALWAYS, ON ERROR
1
Press the [USER FUNCTIONS] button on
the control panel.
2
Press the [ADMIN] button to enter the
administrator password menu.
- See the [User Functions Guide] for the administrator password.
3
Press the [PASSWORD] button, enter the
administrator password, and then press
the [ENTER] button.