Toshiba E-STUDIO2008A - 3.15.3 Exit Motor; Reverse Motor Drive

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 64
3.15.3 Exit Motor / Reverse Motor Drive
1. Exit Motor
The figure shown below is the layout of the driving gears of the exit roller.
Fig. 3-39
2. Reverse Motor (only installed for 35ppm/45ppm/50ppm)
The figure shown below is the layout of the driving gears of the reverse roller.
Fig. 3-40
Reverse
Forward
Exit motor
Exit roller
Reverse motor
Upper transport roller
Reverse roller
Reverse
Forward