Toshiba E-STUDIO2008A - 4.9 Transfer unit; 4.9.1 Transfer unit

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 114
4.9 Transfer unit
4.9.1 Transfer unit
Notes:
When removing the transfer unit, remove the process unit, and avoid a direct sunlight onto the
drum.
(1) Remove the automatic duplexing unit.
 P. 4-149 "4.12.1 Automatic duplexing unit
(ADU)"
(2) Remove 4 screws and take off the bracket
[1].
Fig. 4-312
(3) Disconnect 1 connector and remove the
transfer unit [2].
Fig. 4-313