Toshiba E-STUDIO2008A - 9.1.5 Switching regulator

9
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
REPLACEMENT OF PC BOARDS/HDD
9 - 7
9.1.5 Switching regulator
Notes:
Be sure to unplug the power cable before starting this work.
(1) Remove the left cover.
 P. 4-1 "4.1.2 Left cover"
(2) Release the harnesses from the harness
clamps [1].
(3) Remove 2 screws and slide the switching
regulator [2] slightly toward you.
Fig. 9-18
(4) Disconnect 11 connectors. Slide the
switching regulator [2] toward you and take it
off.
Fig. 9-19
(5) Remove 10 screws and take off the switching
regulator [2].
Fig. 9-20