Toshiba E-STUDIO2008A - 11.2 Firmware Updating with USB Device; 11.2.1 Firmware type and data file name for updating

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 2
11.2 Firmware Updating with USB Device
To update firmware, store update program and firmware data files in the USB device.
The update program is "signature.H.sig", and it needs to be stored in the USB device. It is necessary
for updating firmware except that of the System firmware.
For the data file for each firmware, refer to the following tables.
Notes:
When performing the update, use the latest program.
11.2.1 Firmware type and data file name for updating
Equipment
Option
Firmware Stored Data file name Display
System firmware System control PC
board
(SYS board)
T410SF0Wxxxx.tar
* xxxx is version.
SYSTEM FIRMWARE
(OS Data)
Engine firmware Logic PC board
(LGC board)
TH410MWW.xxx
* xxx is version.
ENGINE FIRMWARE
Scanner firmware System control PC
board
(SYS board)
TH410SLGWW.xxx
* xxx is version.
SCANNER FIRMWARE
System software HDD T410HD0Wxxxx.tar
* xxxx is version.
SYSTEM SOFTWARE
(HD Data)
NIC firmware System control PC
board
(SYS board)
T410NIC0Wxxxx.tar
* xxxx is version.
NIC FIRMWARE
Firmware Stored Data file name Display
RADF firmware DLG board
(MR-3031)
H617DFWW.0xxx
* xxx is version.
RADF FIRMWARE
DSDF firmware DLG board
(MR-4000)
H616DFWW.xxx
* xxx is version.
DSDF FIRMWARE
Finisher firmware
(MJ-1042)
Finisher control PC
board
FIN1042T.xxx
* xxx is version.
FINISHER FIRMWARE
Finisher firmware
(MJ-1109)
Finisher control PC
board
FIN1109T.xxx
* xxx is version.
FINISHER FIRMWARE
Finisher firmware
(MJ-1110)
Finisher control PC
board
FIN1110T.xxx
* xxx is version.
FINISHER FIRMWARE
Saddle stitcher
firmware (MJ-
1110)
Saddle stitcher PC
board
SDL1110T.xxx
* xxx is version.
SADDLE FIRMWARE
Hole punch unit
firmware (MJ-
6105)
Punch control PC
board
PUN6105T.xxx
* xxx is version.
PUNCH FIRMWARE