Toshiba E-STUDIO2008A - 12.2.4 Procedure for disabling data encryption function; 12.2.5 Procedure for discarding HDD when data encryption function is enabled

12
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
BACKUP FUNCTION
12 - 11
12.2.4 Procedure for disabling data encryption function
The basic procedure is the same as the one for enabling this function. To disable it, set “0 (Invalid)” in
the code FS-08-9379 at step  P. 12-9 "[D] Enable data encryption function".
12.2.5 Procedure for discarding HDD when data encryption function is
enabled
Set the data encryption function disabled following the procedure shown in  P. 12-11 "12.2.4
Procedure for disabling data encryption function". Then perform the code HS-73->Erase HDD Securely
(HDD securely erasing) to completely erase the data in the HDD.