Toshiba E-STUDIO2008A - 4.3.11 Scanner damp heater (DH2)

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 33
4.3.11 Scanner damp heater (DH2)
Notes:
Turn the power of the equipment OFF and unplug the power cable before the disassembly and
installation.
(1) Remove the original glass.
 P. 4-18 "4.3.1 Original glass"
(2) Remove 1 connector [1].
Fig. 4-86
(3) Remove the scanner damp heater [2].
Fig. 4-87