Toshiba E-STUDIO2008A - 4.11.6 Reverse motor (M13) <35 ppm;45 ppm;50 ppm>

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 144
4.11.6 Reverse motor (M13) <35ppm/45ppm/50ppm>
(1) Remove the reverse unit.
 P. 4-138 "4.11.1 Reverse unit <35ppm/
45ppm/50ppm>"
(2) Disconnect the 1 connector [1], remove 3
screws, and take off the reverse motor unit
[2].
Notes:
When installing, exercise care not to forget to
attach the timing belt [3].
Fig. 4-385
Fig. 4-386
(3) Disconnect the 1 connector [4], remove 2
screws, and take off the reverse motor [5].
Fig. 4-387