Toshiba E-STUDIO2008A - 4.4 Writing Section; 4.4.1 Laser optical unit

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 34
4.4 Writing Section
4.4.1 Laser optical unit
(1) Remove the receiving tray.
 P. 4-2 "4.1.3 Receiving tray"
(2) Disconnect 1 connector of the duct [1].
Fig. 4-88
(3) Remove 1 screw and take off the duct [1].
Fig. 4-89
(4) Remove the sponge [3] from the laser optical
unit [2].
Fig. 4-90