Toshiba E-STUDIO2008A - 5.13 [73 Assist mode]; 5.13.1 Overview; 5.13.2 Operation procedure

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SELF-DIAGNOSTIC MODE
5 - 40
5.13 [73 Assist mode]
5.13.1 Overview
This mode is available only when the security HDD (ADI-HDD) is mounted in the equipment. It enables
you to check the type of the mounted HDD, revert the ADI-HDD to the factory default or remove keys.
The Functions in this mode are below.
5.13.2 Operation procedure
(1) Perform [HS-73] by pressing the [73 Assist mode] icon.
The following screen is displayed.
Fig.5-25
(2) Press the icon to operate.
Functions Content
Clear Error Flag in Software Installation Clearing update error flag
Format Root Partition Formatting data storage partition
Format HDD Creating HDD partition
Clear SRAM Formatting SRAM data
Key Backup/Restore Backing up/restoring encryption key and license
Erase HDD Securely Erasing HDD securely
Erase SRAM Securely Erasing SRAM securely
Clear Service Tech Password Clearing service tech password