4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 187
4.13.8 MJ-1109 (Finisher)
(1) Press the [Power] button on the control panel
to shut down the machine.
(2) Turn the main power switch of the machine
off.
(3) Disconnect the power cable.
(4) Remove the connector cover.
Fig. 4-510
(5) Disconnect 1 connector.
Fig. 4-511
(6) Install the connector cover.
Fig. 4-512
To Next Page
Loading...
