Toshiba E-STUDIO2008A - 4.10.8 Fuser center thermostat (THMO1);fuser front thermostat (THMO2)

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 127
4.10.8 Fuser center thermostat (THMO1)/fuser front thermostat (THMO2)
(6) Disconnect the connector [6].
(7) Release the latch and take off the exit sensor
[7].
Fig. 4-343
(1) Remove the fuser roller cover.
 P. 4-123 "4.10.4 Fuser roller cover"
(2) Remove 2 screws and take off the leaf spring
[1].
Fig. 4-344
(3) Remove 2 screws and take off the fuser
center thermostat [2] and fuser front
thermostat [3].
Fig. 4-345