Toshiba E-STUDIO2008A - 4.5.35 2 nd drawer feed clutch (CLT4)

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 79
4.5.35 2nd drawer feed clutch (CLT4)
Notes:
When installing the clutch, attach a rotation
stopper.
Fig. 4-216
(1) Remove the clutch cover.
 P. 4-76 "4.5.32 High speed transport
clutch (CLT5)"
(2) Remove the 2nd drawer feed clutch [1].
Notes:
When installing the clutch, attach a rotation
stopper.
Fig. 4-217
Fig. 4-218