Toshiba E-STUDIO2008A - 4.5.36 Flywheel; 4.5.37 Registration roller clutch (CLT1)

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 80
4.5.36 Flywheel
4.5.37 Registration roller clutch (CLT1)
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Remove 1 screw and take off the flywheel
[1].
Fig. 4-219
(1) Remove the flywheel.
 P. 4-80 "4.5.36 Flywheel"
(2) Disconnect 1 connector [1]. Remove the clip
and take off the registration roller clutch [2].
Fig. 4-220
Notes:
When installing the registration roller clutch,
attach a rotation stopper to the clutch cover.
Fig. 4-221