Toshiba E-STUDIO2008A - 6.13.4 Punch hole position adjustment

6
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
SETTING / ADJUSTMENT
6 - 73
6.13.4 Punch hole position adjustment
This adjustment is performed in the Adjustment Mode (FS-05-4825) of the equipment.
Adjustment scale 0.2mm
Adjustable range -4.0 mm to 1.0 mm
Adjustment direction Increasing the value The distance between the punch hole and the
trailing edge of the paper becomes shorter.
Decreasing the value The distance between the punch hole and the
trailing edge of the paper becomes longer.