Toshiba E-STUDIO2008A - 4.5.22 Upper tray-up motor unit; 4.5.23 Lower tray-up motor unit

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 68
4.5.22 Upper tray-up motor unit
4.5.23 Lower tray-up motor unit
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Disconnect 1 connector [1], and then release
the harness from the harness guide.
Fig. 4-184
(3) Remove 3 screws and take off the upper
tray-up motor unit [2].
Fig. 4-185
(1) Remove the rear cover.
 P. 4-6 "4.1.15 Rear cover"
(2) Disconnect 1 connector [1], and then release
the harness from the harness guide.
Fig. 4-186