e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
3 - 40
3.10.2 Composition
Paper feed
1st/2nd drawer feed unit 1st/2nd drawer pickup roller PM parts
1st/2nd drawer feed roller PM parts
1st/2nd drawer separation roller PM parts
1st/2nd drawer paper stock sensor S10/S13
1st/2nd drawer tray-up sensor S11/S14
1st/2nd drawer empty sensor S12/S15
1st/2nd drawer feed clutch CLT3/CLT4
Bypass unit Bypass feed roller PM parts
Bypass separation pad PM parts
Bypass paper sensor S8
Bypass feed clutch CLT2
Paper width detection PC board SFB
Transport section, other 1st/2nd drawer tray-up motor M11/M12
Registration sensor S17
Registration roller (rubber)
Registration roller (metal)
1st/2nd transport sensor S16/S9
Transport roller
Registration roller clutch CLT1
Hi-speed clutch CLT5
Low-speed clutch CLT6
Feed cover opening/closing switch SW10
To Next Page
Loading...
