Toshiba E-STUDIO2008A - 4.5.15 1 st drawer separation roller guide

4
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
DISASSEMBLY AND REPLACEMENT
4 - 59
4.5.15 1st drawer separation roller guide
(1) Remove the 1st drawer paper feed unit.
 P. 4-58 "4.5.14 1st drawer paper feed
unit"
(2) Remove 2 screws from the 1st drawer
separation roller guide [1].
Fig. 4-159
(3) Release two latches and remove the 1st
drawer separation roller guide [1].
Fig. 4-160
(4) Remove the E-ring and take off the shaft [2].
Fig. 4-161