Toshiba E-STUDIO2008A - 4.12.17 Fuser section cooling fan <35 ppm;45 ppm;50 ppm>

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 166
4.12.17 Fuser section cooling fan <35ppm/45ppm/50ppm>
(3) Disconnect 2 connectors [2] from the rear
side of the ADU interlock switch cover.
(4) Release the latch and remove the ADU
interlock switch [3].
Fig. 4-445
(1) Remove the ADU guide assembly.
 P. 4-152 "4.12.3 ADU guide assembly
<35ppm/45ppm/50ppm>"
(2) Disconnect 1 connector and remove the
fuser section cooling fan [1].
Fig. 4-446