Toshiba E-STUDIO2008A - Page 204

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 84
(5) Remove 5 screws and take off the paper
feed drive gear cover [6].
Fig. 4-230
Notes:
When replacing the parts or performing
machine refreshment, apply 2 rice-sized
grains of white grease (Molykote EM-30L) to
the shaft [7].
Fig. 4-231
(6) Remove the paper feed drive gear.
Fig. 4-232