e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 150
(6) Slide the rear hinge [4] toward the rear side
and pull it out from the automatic duplexing
unit.
Fig. 4-402
(7) Slightly lift up the automatic duplexing unit
[5], and then remove it by sliding it toward
the rear side.
Fig. 4-403
Notes:
When installing, fit the boss [7] of automatic
duplexing unit to the front hinge [6].
Fig. 4-404
To Next Page
Loading...
