Toshiba E-STUDIO2008A - Page 280

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
4 - 160
(3) Remove 1 ground cable fixing screw [2].
Remove 2 screws.
Fig. 4-427
(4) Disconnect 1 connector and take off the ADU
motor assembly [3].
Fig. 4-428
(5) Remove 2 screws and take off the ADU
motor [4].
Fig. 4-429