e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
SETTING / ADJUSTMENT
6 - 68
[B] Adjustment
Simplex copying:
(1) Performs FS-05-3044.
(2) Enter the value.
• If the leading edge (F) margin of the copy image is larger than the (E) margin of the chart,
enter a value smaller than the current one.
Notes:
Changing one value shifts the copy image by 0.2 mm.
• If the leading edge (F) margin of the copy image is smaller than the (E) margin of the chart,
enter a value larger than the current one.
Notes:
Changing one value shifts the copy image by 0.2 mm.
(3) Press the [OK] button.
Duplex copying:
(1) Performs FS-05-3045.
(2) Enter the value.
• If the leading edge (F) margin of the copy image is larger than the (E) margin of the chart,
enter a value smaller than the current one.
Notes:
Changing one value shifts the copy image by 0.2 mm.
• If the leading edge (F) margin of the copy image is smaller than the (E) margin of the chart,
enter a value larger than the current one.
Notes:
Changing one value shifts the copy image by 0.2 mm.
(3) Press the [OK] button.
To Next Page
Loading...
