Toshiba E-STUDIO2008A - Page 790

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
8 - 252
[ 2 ] RFC related error
[2500] HOST NAME error (RFC: 500) / Destination mail address error (RFC: 500) / Terminal mail
address error (RFC: 500)
[2501] HOST NAME error (RFC: 501) / Destination mail address error (RFC: 501) / Terminal mail
address error (RFC: 501)
[2503] Destination mail address error (RFC: 503)
[2504] HOST NAME error (RFC: 504)
[2551] Destination mail address error (RFC: 551)
[2550] Destination mail address error (RFC: 550)
[2552] Terminal/Destination mail address error (RFC: 552)
Classification Error item
RFC related error
Check item Measures
Setting • Check if the Terminal mail address and Destination mail
address are correct.
• Check if the mail server is operating properly.
• Turn the power OFF and then back ON. Perform the job in
error again.
Classification Error item
RFC related error
Check item Measures
Setting • Check if the mail server is operating properly.
• Turn the power OFF and then back ON. Perform the job in
error again.
• If the error still occurs, replace the SYS board.
Replace parts Remarks
SYS board
Classification Error item
RFC related error
Check item Measures
Setting • Check the state of the mail box in the mail server.
Classification Error item
RFC related error
Check item Measures
Setting • Confirm the size on the mail server.
• Transmit again in text mode or with lower resolution or
divide the document and transmit again.
• If the error still occurs, turn the power OFF and then back
ON. Perform the job in error again.