Toshiba E-STUDIO2008A - Page 968

e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
FIRMWARE UPDATING
11 - 8
(6) Select the item.
“*” is displayed next to the selected item. Display or delete the “*” by pressing the number of the
item.
(7) Press the [START] button.
Updating starts and the processing status is displayed on the LCD screen.
Item Remarks
1. SYSTEM FIRMWARE(OS Data) Updating System firmware
2. SYSTEM SOFTWARE (HD Data) Updating System software
3. ENGINE FIRMWARE Updating Engine firmware
4. SCANNER FIRMWARE Updating Scanner firmware
5. RADF FIRMWARE
(DSDF FIRMWARE)
Updating RADF firmware
(Updating DSDF firmware)
6. NIC FIRMWARE Updating NIC firmware
7. FAX FIRMWARE Updating FAX firmware
8. FINISHER FIRMWARE Updating Finisher firmware
9. SADDLE FIRMWARE Updating Saddle firmware
10. PUNCH FIRMWARE Updating Punch firmware
Status display during update Status display when update is completed
SYSTEM FIRMWARE(OS Data) update in
progress
SYSTEM FIRMWARE(OS Data) Completed
SYSTEM SOFTWARE (HD Data) update in
progress
SYSTEM SOFTWARE (HD Data) Completed
ENGINE FIRMWARE update in progress ENGINE FIRMWARE Completed
SCANNER FIRMWARE update in progress SCANNER FIRMWARE Completed
RADF FIRMWARE update in progress RADF FIRMWARE Completed
NIC FIRMWARE update in progress NIC FIRMWARE Completed
FAX FIRMWARE update in progress FAX FIRMWARE Completed
FINISHER FIRMWARE update in progress FINISHER FIRMWARE Completed
SADDLE FIRMWARE update in progress SADDLE FIRMWARE Completed
PUNCH FIRMWARE update in progress PUNCH FIRMWARE Completed