Toshiba e-studio212 - Bypass Tray

9
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
PAPER FEEDING SYSTEM
9 - 11
9.5.2 Bypass tray
9.5.3 Bypass separation pad
(1) Take off the bypass unit.
 P.9-10 "9.5.1 Bypass unit"
(2) Release each latch to take off the front and
rear tray arms.
(3) Take off the bypass tray.
Fig. 9-9
(1) Take off the bypass unit.
 P.9-10 "9.5.1 Bypass unit"
(2) Remove 2 screws and take off the bypass
separation pad unit.
Fig. 9-10
(3) Remove 1 screw on the bottom of the bypass
separation pad unit, and take off the cover.
Fig. 9-11
Latch
Bypass tray
Bypass separation pad unit
Cover