Toshiba e-studio212 - Separation Finger

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
FUSER / EXIT UNIT
12 - 18
12.6.5 Separation finger
(1) Take off the fuser roller unit.
 P.12-14 "12.6.2 Pressure roller unit /
Fuser roller unit"
(2) Remove 3 screws and take off the sub guide.
Fig. 12-22
(3) Remove 5 springs from the hooks.
Fig. 12-23
(4) Remove 5 drum separation fingers with the
springs.
Fig. 12-24
Sub guide
Fuser roller unit
Spring
Separation finger
Spring