Toshiba e-studio212 - ADU Driving PC Board (ADU); ADU Motor (M8)

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
13 - 12
13.6.2 ADU driving PC board (ADU)
13.6.3 ADU motor (M8)
(1) Take off the ADU.
 P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2) Disconnect 2 connectors, release the latch
and take off the ADU driving PC board.
Fig. 13-10
(1) Take off the ADU.
 P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2) Disconnect 1 connector, remove 2 screws
and take off the ADU motor with the bracket.
Fig. 13-11
(3) Remove the gear.
(4) Remove 2 screws and take off the ADU
motor.
Fig. 13-12
Latch
ADU driving PC board
Connector
ADU motor Bracket
Gear
ADU motor