Toshiba e-studio212 - 1 Specifications; Accessories; Options; Supplies; Specifications

1
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1 - 1
1. SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
1.1 Specifications
 Copy process Indirect electrophotographic process (dry)
 Type Desktop type
 Original table Fixed type (the left rear corner used as guide to place originals)
 Accepted originals Sheet, book and 3-dimensional object. The automatic document feeder
(ADF) and reversing automatic document feeder (RADF), only accepts paper
which are not pasted or stapled. (Single-sided originals: 50 to 127 g/m
2
/13 to
34 lb. Bond) Carbon paper are not acceptable either.
Maximum size: A3/LD
 Copy speed (Copies/min.)
e-STUDIO182
e-STUDIO212
e-STUDIO242
* “–” means “Not acceptable”.
* The copy speed in the above table are available when originals are manually placed for single side,
multiple copying.
When the value is different among e-STUDIO182, 212 and 242, the value for
e-STUDIO212 is shown by [ ] and the value for e-STUDIO242 is shown by { }.
Paper size Drawer
Bypass feed
PFU
PFP
Size
specified
Size not
specified
Upper
drawer
Lower
drawer
A4, B5, LT 18 16 11 16 16 16
A5-R, ST-R - 16 11 - 16 16
A4-R, B5-R, LT-R 15.5 15.5 11 15.5 15.5 15.5
B4, LG, FOLIO,
COMPUTER
13 13 11 13 13 13
A3, LD 11 11 11 11 11 11
Paper size Drawer
Bypass feed
PFU
PFP
Size
specified
Size not
specified
Upper
drawer
Lower
drawer
A4, B5, LT 21 20 20 20 20 20
A5-R, ST-R - - 20 - 20 20
A4-R, B5-R, LT-R 15.5 15.5 15.5 15.5 15.5 15.5
B4, LG, FOLIO,
COMPUTER
13 13 13 13 13 13
A3, LD 11 11 11 11 11 11
Paper size Drawer
Bypass feed
PFU
PFP
Size
specified
Size not
specified
Upper
drawer
Lower
drawer
A4, B5, LT 24 23 23 23 23 23
A5-R, ST-R - - 23 - 23 23
A4-R, B5-R, LT-R 17.5 17.5 17.5 17.5 17.5 17.5
B4, LG, FOLIO,
COMPUTER
15 15 15 15 15 15
A3, LD 12.5 12.5 12.5 12.5 12.5 12.5