Toshiba e-studio212 - LCD PC Board (LCD)

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
CONTROL PANEL
5 - 8
5.5.3 LCD PC board (LCD)
(3) Take off 2 brackets by removing 2 screws
each.
Fig. 5-9
(4) Remove 11 screws, disconnect 1 connector,
and then take off the control panel PC board.
Fig. 5-10
(1) Take off the control panel pc board.
 P.5-7 "5.5.2 Control panel PC board
(HPNL)"
(2) Remove 2 screws and take off the LCD PC
board.
Fig. 5-11
Bracket
Control panel PC board
Connector
LCD PC board