Toshiba e-studio212 - Upper Transport Roller; Lower Transport Roller

13
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
AUTOMATIC DUPLEXING UNIT (ADU) (OPTION: MD-0103)
13 - 13
13.6.4 Upper transport roller
13.6.5 Lower transport roller
(1) Take off the ADU.
 P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2) Take off the ADU motor.
 P.13-12 "13.6.3 ADU motor (M8)"
(3) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
Fig. 13-13
(4) Remove 1 E-ring, 1 gear and 2 bushings,
and then take off the upper transport roller.
Fig. 13-14
(1) Take off the ADU.
 P.13-11 "13.6.1 Automatic Duplexing Unit
(ADU)"
(2) Remove 2 E-rings, 2 pulleys and 2 pins, and
then take off the timing belt.
Fig. 13-15
Pin Belt
Pulley
E-ringPulley
Bushing
Upper transport roller
Gear Bushing
E-ring
Pin Belt
Pulley
E-ringPulley