Toshiba e-studio212 - Disassembly and Replacement; Process Unit

10
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
DRUM RELATED SECTION
10 - 9
10.7 Disassembly and Replacement
10.7.1 Process unit
(1) Open the ADU cover and transfer unit.
(2) Open the front cover and take off the toner
cartridge.
(3) Disconnect 1 connector. Loosen 2 screws
and pull out the process unit.
Fig. 10-6
Fig. 10-7
Process unit
for MJD
Process unit
except for MJD