Toshiba e-studio212 - Bypass Separation Pad; Bypass Roller Unit

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
PAPER FEEDING SYSTEM
9 - 12
9.5.4 Bypass roller unit
(4) Take off the bypass separation pad while
pinching the mounting bracket.
Fig. 9-12
Note:
When the separation pad is replaced, apply
one grain of rice-sized white grease to the
supporting point.
Fig. 9-13
(1) Take off the bypass unit.
 P.9-10 "9.5.1 Bypass unit"
(2) Remove 2 screws, and take off the cover.
Fig. 9-14
Bypass separation pad
Bypass separation pad
White grease
Cover