Toshiba e-studio212 - Bypass Pickup Solenoid (SOL2)

9
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
PAPER FEEDING SYSTEM
9 - 15
9.5.8 Bypass pickup solenoid (SOL2)
(3) Take off the actuator with the spring while
pushing the bracket stays wider.
Fig. 9-21
(4) Release 2 latches, take off the bypass paper
sensor, and disconnect the connector.
Fig. 9-22
(1) Take off the bypass unit.
 P.9-10 "9.5.1 Bypass unit"
(2) Remove 1 screw.
Fig. 9-23
Actuator
Spring
Bracket
Bracket
Connector
Bypass paper sensor
Bypass unit
Screw