Toshiba e-studio212 - Disassembly and Replacement; Control Panel Unit; Control Panel PC Board (HPNL)

5
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
CONTROL PANEL
5 - 7
5.5 Disassembly and Replacement
5.5.1 Control panel unit
5.5.2 Control panel PC board (HPNL)
(1) Remove 3 screws.
Fig. 5-6
(2) Take off the control panel unit while lifting it
up.
(3) Disconnect 2 connector.
Note:
When installing the control panel unit, be
sure not to have the harness being caught by
the front right cover and the unit.
Fig. 5-7
(1) Take off the control panel unit.
 P.5-7 "5.5.1 Control panel unit"
(2) Remove 2 screws and take off the cover
while sliding it.
Fig. 5-8
Connector
Control panel unit
Cover