Toshiba e-studio212 - Main Charger; Main Charger Grid

10
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
DRUM RELATED SECTION
10 - 13
10.7.4 Main charger
10.7.5 Main charger grid
(3) Release the harness from the harness clamp
and pull out the discharge LED.
Fig. 10-16
(1) Take off the discharge LED unit.
 P.10-12 "10.7.3 Discharge LED (ERS)"
(2) Pull out the main charger and take it off by
sliding it to the rear side.
Note:
Be careful not to touch or scratch the drum
surface at this time.
Fig. 10-17
(1) Take off the main charger.
 P.10-13 "10.7.4 Main charger"
(2) Remove the spring and take off the main
charger grid.
Note:
Do not touch the mesh area of the grid.
Fig. 10-18
Discharge LED
Main charger
Main charger grid
Spring